👉 Features of K67 Capsule :
The K67 capsule is one of Neumann‘s best-known condenser microphone capsules. It was developed as a slightly more simplistic alternative to the basic Neumann K47 capsule.
The K67 Premium capsule of the brand “Replica Microphone” is a large-diaphragm capsule with a Mylar diaphragm. The Mylar film is very thin, only 6 microns, and it is coated with gold. An electrical wire is mounted in the center called “center-terminal construction”.
It will be a very good addition to your U67 setup and will bring a superior sound gain thanks to its premium finish.
👉 Details of K67 Capsule :
Brand: Replica Microphone (Premium Gold Mylar)
Capsule diameter: 34 mm (Double sides)
Diaphragm diameter: 24 mm
Capsule thickness (with screws): 13,3 mm
Polar Patter: Cardioid, Figure 8, Omni
Sensitivity: -30dB （0dB=1V/Pa &1KHz ）
Frequency Response: 20Hz∽20KHz
Max SPL：130dB &1KHz=1% THD
Power Supply: 48V ±5V
Membrane composition: Double Gold plated 6 micron mylar
Used Temperature：+5℃∽+35℃ Humidity：›60%
Saved Temperature：-10℃∽+35℃ Humidity：›60%
✅ Included in the pack :
- K67 Premium capsule
- Capsule holder
- 2 x screws
- 1 x M3 screw and 1x fixation ring.
- Box
📈 Possibility of pairing :
For all orders of two identical capsules, we will pair your capsules free of charge.
👂 Frequency Response
Here is the analysis graph between sound level and response frequency (Hz) developed for the K67 capsule. Analysis made by an independent sound laboratory.
Result : The capsule K67 Premium have a good and pretty ‘flat’ low-end and show the (desired) boost around 10 KHz.
