The best U47 FET clone
With our Premium K47 capsule according to the original specifications, the sound of our kit is faithful to the best microphone found in the world’s largest studios.
Limited Edition!
-50%
U47 FET DIY Microphone Kit
From 599,00€ ex. VAT
Our kit is a perfect clone of the legendary Vintage Neumann U47 FET microphone ✅ the standard for years in the recording industry and studios around the world. You have the choice in the options, either in DIY it’s you the builder or already assembled by Mic&Mod and ready to play!
Capture the punchy sound, power and dynamics with facility!
Our U47 Fet clone is a faithful version of the original from the 70’s before the re-release of the brand’s model. This is the FET version of the famous U47 tube microphone!
Circuit delivers fast and detailed response
Our U47 FET version uses a premium and efficient detailed circuit, coupled with the K47 capsule, in dual-diaphragm with a cardioid pickup pattern. This capsule is known for its excellent dynamic response and wide frequency range. It’s just enough to enhance the sense of air and presence in your recordings, and the wide-ranging response gives you a vibrant sound that holds up extremely well to equalizing and compression.
Our design uses a high quality 2N3819 FET as the model of that time, a -10 dB pad and a low cut filter, which will be the best tool for your loud sounding recordings like drum kicks!
We also thought about mobility with the design of a quality aluminum case, ideal for your outdoor recordings or simply to preserve your microphone!
All components are carefully matched and selected in our workshop. We attach great importance to the precision of our circuits in order to be as accurate as possible compared to the original.
Included in the DIY Kit
- U47 Fet Silver Microphone Premium Body (in kit with pre-drilling for logo placement)
- U47 Fet Chrome Headbasket 2 layers
- BV8 Output Transformer by Replica Microphones®
- K47 Premium Simple-Backplate Capsule by Replica Microphones® , German Gold Mylar
- Premium components (Styroflex, Wima, 1% resistor, Transistors, 2N3819 FET)
- Special U47 Fet vintage switches
- PCB U47 Fet Green Version
- Premium aluminium transport case with cut foam
- Vintage curved metal logo badge M&M 24x24 mm (not stuck on DIY microphone)
- Building guide downloadable
*Microphone sold unassembled (assembling in option)
⛔️ Electronic skills required
* Free shipping offer from €149
The vintage label
We have tried to stay as close as possible to the original vintage design, here is the new vintage label from MIC&MOD which will be affixed to every DIY or built model kit!
Music sound samples of U47 Fet clone
🎧 Please use headphones for better sound immersion
Specifications
- Polar Patterns: Cardioid
- Signal to Noise Ratio: 76dB (A weighted)
- Frequency Response: 40Hz-16kHz
- Output Impedance: 150 Ohms
- Requires +48V Phantom Power
- Max SPL: 137 dB (147 dB with Pre-attenuation)
- Low Cut Filter: 140Hz
- Color: Vintage Silver
U47 FET Frequency Curve
Reviews
Customer Reviews
Based on 4 reviews
100%
(4)
0%
(0)
0%
(0)
0%
(0)
0%
(0)
S
Thanks to the option to order the kit without a capsule I was able to customize it with an M7 capsule. Compared to the other kits this one is a little bit brighter than the tube-U47 (M7) and sounds a little bit more natural and balanced with my voice. The quality of the components is as excellent as in the other kits. Just follow the steps in the guide carefully and you will get a gem! Professional soldering equipment is mandatory, gloves very recommended especially for the high impedance section.
K
J'ai eu la chance de pouvoir construire mon propre U47 Fet avec ce modèle, j'ai toujours voulu en avoir un mais impossible de débourser autant pour l'original, je le trouve vraiment super et je pense qu'on est loin des clones concurrents à modèle égal
O
I had already bought at Mic&Mod the U47 Fet Renaissance version (designed by Atlantic Phonic) a few years ago, I didn't like too much the design with the leds, but the sound was good, with this one they correct all the flaws of the old one, I was able to compare it with a friend who has the real one, I think the clone is above!
C
I had a real one in my hands at one time, but I find the price of the original abusively expensive for a FET microphone, I built the Mic&Mod U47 Fet version in a few hours, and I am very satisfied with the result, the sound is clean, the design is beautiful, I can't wait to use it in studio recording
English