Features of M7 Capsule :
The term M7 refers to a type of condenser microphone capsule originally manufactured in the former East Germany. It was the first original capsule to equip the Neumann U-47 microphone.
Each M7 capsule of our “Replica Microphone” brand consists of two 6 micron mylar diaphragms that are bonded to a single common back plate. This assembly process is also somewhat unique to the M7, since most other condenser microphone capsules use screwed-on tension rings to secure and tune their diaphragms.
The back plate of the M7 is 32 mm in diameter; the diameter of the suspended portion of the diaphragm is 25 mm. Both diaphragms are terminated in the center.
Neumann Germany stopped producing the M7 in 1958. This reissue is therefore a unique design to recover the vintage sound of this capsule.
Details of M7 Capsule :
Brand: Replica Microphone (Premium Gold Mylar)
Capsule diameter: 34 mm (Double sides)
Diaphragm diameter: 27 mm
Polar Patter: Cardioid, Figure 8, Omni
Sensitivity: Cardioid: -32 dBV/Pa (25 mV) / Omni: -37.1 dBV/Pa (14 mV)
Frequency Response: 20Hz∽20KHz
Power Supply: 48V ±5V
Membrane composition: Double Gold plated 6 micron mylar
Used Temperature: +5℃∽+35℃ Humidity：›60%
Saved Temperature：-10℃∽+35℃ Humidity：›60%
Included in the pack :
- M7 Premium capsule
- Capsule holder
- 1 x M3 screw and 1x fixation ring.
Possibility of pairing :
For all orders of two identical capsules, we will pair your capsules free of charge.
Here is the analysis graph between sound level and response frequency (Hz) developed for the M7 capsule. Analysis made by an independent sound laboratory.
Give your rating!
Click on a star to rate it!